Trace gardens in Zen & Now: following the dotted patterns
How Trace mode works, what each pattern asks of you, how the dots decide what counts, and tips for finishing rows, rings, waves, spirals and corner arcs.
Published
Trace is the closest thing Zen & Now has to levels. Each garden lays a dotted pattern in the sand for you to follow. There is no clock and no score, just a numbered garden and the quiet satisfaction of a finished pattern.
Starting a garden
Choose Trace from the Mode button or from the Garden menu, which also shows the number of the garden you are on. The bed is swept smooth and a faint line of dots appears, showing the path of each pass of the rake. A thin progress line under the title fills as you go, and a short tip at the top says what this pattern wants.
Trace always uses the five-tine rake, so the rows line up with the dots.
How the dots count
A dot disappears when the rake passes over it in line with the pattern. The rake has to cover the dot, and it has to be heading roughly the same way as the line it belongs to. If you cross a row of dots at a steep angle, they stay put. That is what keeps Trace about following the pattern rather than scribbling over everything.
You don't need every dot. When nearly all of them are gone, the garden is complete: a soft chime plays and a card tells you which garden you raked and how long you took. Choose Stay a while to keep looking at it, or Next garden to move on.
If the dots get in the way of enjoying the finished look, you can turn them off in the Garden menu with "Show the dotted lines when tracing", although then you are raking from memory.
The patterns
Gardens cycle through a set of patterns, and they grow a little more involved as the numbers climb, with more pieces and more rings. The pieces vary from garden to garden: stones, a tree or bamboo, sometimes a lantern or basin, and every garden number always gets the same ones.
- Rows: long straight rows from side to side. Swing round at each end and the rake lands on the next row by itself.
- Rows and rings: rows first, then circle each stone. Rings go last so the rows don't cut through them.
- Waves: gentle side-to-side curves. Let your finger sway and follow the dots; the rake smooths out small wobbles.
- Columns: the same idea as rows, but up and down the bed.
- Slanted rows: diagonal lines across the bed, then rings around the stones.
- Spiral: start right next to the stone in the middle and spiral outward, then ring any other stones.
- Corner arcs: curves that sweep around a stone in one corner of the bed. In a round bed there is no corner, so you get waves instead.
Tips for finishing
- Go long. Pull each row from one side of the bed to the other in a single steady stroke. Short dabs miss dots at the joins.
- Turn wide. At the end of a row, swing round smoothly rather than jabbing back. The turn lands you one rake over, exactly where the next row of dots is.
- Rings last. Rake the main pattern first, then follow the ring dots around the stones. If you ring a stone too early, the rows will run over your rings.
- Look for strays. If the progress line stalls just short of the end, scan for a few dots left at the edges of the bed or beside a stone.
- Use Smooth if you need to. A messy patch can be wiped with Smooth and raked again; the dots you already cleared stay cleared.
Changing the look while you trace
Every look and setting in the Garden menu works in Trace too. Changing the sand color, the light or the falling leaves keeps your progress. Changing the shape or size of the bed starts the same garden again, because the pattern has to be laid out for the new shape.
Trace keeps your place, so the next time you choose it you carry on from the garden you reached.